Supernova M99 DY PRO Dynamo Front Light with High Beam Function

With the M99 DY PRO from SUPERNOVA, you get a super-bright dynamo front light that easily fulfils even the highest demands. 

In addition to the powerful low beam, the front light has a switchable high beam that can be operated using the wired handlebar switch. When activated, it provides up to 1000 lumens. This is bright enough to find your way safely even in the darkest night and to see far ahead. The high beam light illuminates bends much better than a low beam, even when the bike is tilted sharply. Nothing stands in the way of rapid descents. And you also benefit from the upward-radiating light in the forest, as it allows you to recognise low-hanging branches at an early stage.

Details:
• Powerful dynamo headlight with high beam function
• Compatible with all common dynamos (6 V / 3 W)
• Homogeneous and wide low beam with up to 200 lux lighting power
• High beam can be switched on via magnetic handlebar switch (from approx. 20 km/h)
• Parking light function for increased visibility (5 min)
• Light sensor for automated switch-on in the dark
• Specially developed M99 Matrix reflector for uniform light distribution
• Aluminium housing for excellent cooling and high durability
• Approved for all types of bikes according to German StVZO regulations

Technical details:
• Material: aluminium
• Mounting headlight: handlebar or fork mount (available separately)
• Mounting high beam switch: handlebar (Ø 22.2 mm)
• Illuminant: LED
• Lighting power/light flux: 200 lux / 700 lumen (low beam), 200 lux / 1500 lumen (high beam)
• Power supply: dynamo (6 V / 3 W)
• Stand light: yes (capacitor technology, without batteries)
• Light modes: ON / OFF / low beam / high beam / parking light
• Cable length: approx. 980 mm (dynamo cable), approx. 1080 mm (rear light cable), approx. 212 mm (handlebar switch cable)
• Dimensions: 38 x 78 x 50 mm
• Weight: approx. 120 g (without mount and cable)

In the box:
• 1 SUPERNOVA M99 DY PRO dynamo headlight
• 1 high beam switch
• 1 handlebar mount for high beam switch

Note:
A handlebar mount for the headlight is NOT included! You can find a suitable mount under prod. code: 1647170001.

The M99 DY PRO outputs direct current at the connection cable for the rear light. However, many rear lights from other manufacturers require alternating current to function correctly. It is therefore advisable to connect a Supernova rear light to the M99 DY PRO.

In principle, the M99 DY Pro is suitable for operation with any standard 6V/3W hub dynamo. The SONdelux from the manufacturer Schmidts Original hub dynamo is an exception. Due to the flatter voltage curve of this model, the M99 DY Pro does not reach full power, and the high beam is only available at a significantly higher speed. The SON28 is more suitable.

Compatible SUPERNOVA accessories:
• SUPERNOVA UNIVERSAL HBM 2 handlebar mount (prod. code: 1647170001)
• SUPERNOVA Multimount CS (prod. code: 1647120001)
• SUPERNOVA Multimount HSOP (prod. code: 1647150001)
• SUPERNOVA extension cable for high beam switch (prod. code: 1647430001)
• SUPERNOVA GoPro adapter (prod. code: 1647180001)
• SUPERNOVA high beam switch (prod. code: 1647450001)

Manufacturer: Supernova Design GmbH , Industriestr. 26, 79194 Gundelfingen, Germany, supernova-lights.com