TetraRack M2L MTB Rear Rack System

Abstract SKU
2696024
SKU
230945301
Abstract Product Id
138643
Concrete Product Id
575320
TetraRack M2L MTB Rear Rack System
TetraRack M2L MTB Rear Rack System
TetraRack M2L MTB Rear Rack System
TetraRack M2L MTB Rear Rack System
TetraRack M2L MTB Rear Rack System
TetraRack M2L MTB Rear Rack System
TetraRack M2L MTB Rear Rack System
TetraRack M2L MTB Rear Rack System
TetraRack M2L MTB Rear Rack System
TetraRack M2L MTB Rear Rack System
TetraRack M2L MTB Rear Rack System
TetraRack M2L MTB Rear Rack System

Topeak TetraRack M2L MTB Rear Rack System

88,52 € OVH 119,95 €

Hinta sis. ALV plus 9,95 € (toimituksesta maahan Suomi)

Tuotenumero: 230945301

Toimitusaika 6-10 työpäivää

Store availability

Stock available in  Bocholt Biketown
Tiedot

The TetraRack M2L rear rack system by Topeak attaches to the rear stay of full-suspension or hardtail MTBs even without rack eyelets. Its quick mounting system with velcro straps is compatible with a wide range of bicycles and frame geometries. With a simple sliding mechanism, the top plate can be adjusted perfectly – independent of the fork angle.

The integrated QuickTrack™ system allows Topeak TrunkBags to slide and lock into place and be released again at the push of a button. The TetraRack M2L is the rack recommended by Topeak for transporting the E-Xplorer TrunkBox. For normal MTX TrunkBags, Topeak recommends the TeraRack M2 (prod. code 2296725), which is somewhat more compact.

Tip:
The TetraRack M1 (prod. code 2296723) is a matching front rack system, that can be mounted on MTB rigid forks or suspension forks.

Details:
• Rack attaches to rear stays of full-suspension or hardtail MTBs
• Quick mounting with velcro straps (requires no rack eyelets)
• Universal size, fits most frame geometries
• Sliding mechanism for easy levelling of top plate
• Topeak QuickTrack™ system for compatible Topeak TrunkBags and rear baskets
• Also compatible with KLICKfix® / RackTime® Snapit or Vario System bags
• Including bracket to attach reflectors or lamps
• Allows for optional upgrade with side frames for panniers (prod. code 2338590)

Technical details:
• Intended use: MTB, Hybrid (incl. e-bike)
• Material: aluminium, fibreglass composite, polyamide
• Attachment: attaches to rear stay with velcro straps
• Compatibility: Topeak MTX/RX TrunkBags, Topeak MTX rear baskets, KLICKfix® / RackTime® Snapit or Vario System bags
• Maximum load: 12 kg
• Compatible wheel sizes: 27.5“ to 29“
• Compatible tyre width: up to 2.8“ (71 mm)
• Dimensions: approx. 47.5 x 38.5 x 13.5 cm
• Weight: approx. 1.1 kg

Mounting requirements:
• Minimum seat stay angle: 30°
• Minimum tube diameter: 15 mm
• Required free mounting space: approx. 200 mm
• Seat stay spacing: approx. 95 – 125 mm

Compatible Topeak TrunkBags and bike baskets available at ROSE:
• Topeak MTX TrunkBag DX (product code: 2183352)
• Topeak MTX TrunkBag EX (product code: 2183370)
• Topeak MTX Basket Rear (product code: 762113)

Tip:
With the Topeak TetraRack Side Frame Set (prod. code 2338590) you can also use the TetraRack system with panniers!

In the box:
• 1 Topeak TetraRack M2L rear rack system
• 1 bracket for reflectors or lamps
• 1 hex wrench, 2.5 mm

Note:
Mounting the rack on carbon frames is NOT recommended. Compatibility cannot be guaranteed for extraordinary frame geometries (e.g. seat stays run at an angle to the wheel axle).

ATTENTION:
NOT compatible with V-brakes and cantilever brakes!


Ominaisuudet
GTIN:
4710069703076
Wheel size:
27,5", 28", 29", 27,5+"
Arvostelut 9
(8)
(0)
(0)
(1)
(0)

Reviews in our webshop are checked for authenticity. To ensure that the reviews have been written by customers, only logged-in customers can write reviews. Reviews can only be submitted by logged-in customers who have purchased the product being reviewed, which is automatically checked against the customer's order history.

(9)

Kirjoita arvostelu

TetraRack M2L MTB Rear Rack System

Väri: 
Standard
Koko:
Standard
Ich habe den Träger an meinem E-Mtb Fully montiert, einfche Montage und hält bombenfest. Absolute Empfehlung.

TetraRack M2L MTB Rear Rack System

Väri: 
Standard
Koko:
Standard
Montiert auf einem eBike Fully. Härtetest bestens überstanden. Montage, wenn man(n) nicht zwei linke Hände und ein funktionierendes Hirn hat, problemlos :-)

TetraRack M2L MTB Rear Rack System

Väri: 
Standard
Koko:
Standard
Wurde wegen umdisponierung zurück geschickt.

TetraRack M2L MTB Rear Rack System

Väri: 
Standard
Koko:
Standard
Habe den Träger für ein Cube Stereo Hybrid SL 140 gekauft um eine längere Tour (2 Wochen) zu unternehmen. Passt super

TetraRack M2L MTB Rear Rack System

Väri: 
Standard
Koko:
Standard
Lässt sich prima montieren. Bei der Montage unbedingt nach der Anleitung gehen und die Schrauben vorher lösen. Dann lässt sich das prima am Hinterbau montieren und ausrichten. Bin dann 320km über Wald- und Feldwege gefahren mit dem MTX Trunk Bag EX. Ist alles dran geblieben und hat den Rucksack schön entlastet.

TetraRack M2L MTB Rear Rack System

Väri: 
Standard
Koko:
Standard
Die Befestigung am Rad ist sehr stabil und rutscht auch nicht nach unten. Seitlich ist der Träger natürlich nicht so stabil, wie ein einteilig gefertigtes Teil, aber man darf ja auch nicht soviel Gewicht dranhängen. Es empfiehlt sich, die maximale Zuladung zu beachten. Deshalb habe ich auch nur kleinere Taschen dazugekauft.

TetraRack M2L MTB Rear Rack System

Väri: 
Standard
Koko:
Standard

TetraRack M2L MTB Rear Rack System

Väri: 
Standard
Koko:
Standard

TetraRack M2L MTB Rear Rack System

Väri: 
Standard
Koko:
Standard