Topeak TetraRack M2L MTB Rear Rack System

The TetraRack M2L rear rack system by Topeak attaches to the rear stay of full-suspension or hardtail MTBs even without rack eyelets. Its quick mounting system with velcro straps is compatible with a wide range of bicycles and frame geometries. With a simple sliding mechanism, the top plate can be adjusted perfectly – independent of the fork angle.

The integrated QuickTrack™ system allows Topeak TrunkBags to slide and lock into place and be released again at the push of a button. The TetraRack M2L is the rack recommended by Topeak for transporting the E-Xplorer TrunkBox. For normal MTX TrunkBags, Topeak recommends the TeraRack M2 (prod. code 2296725), which is somewhat more compact.

Tip:
The TetraRack M1 (prod. code 2296723) is a matching front rack system, that can be mounted on MTB rigid forks or suspension forks.

Details:
• Rack attaches to rear stays of full-suspension or hardtail MTBs
• Quick mounting with velcro straps (requires no rack eyelets)
• Universal size, fits most frame geometries
• Sliding mechanism for easy levelling of top plate
• Topeak QuickTrack™ system for compatible Topeak TrunkBags and rear baskets
• Also compatible with KLICKfix® / RackTime® Snapit or Vario System bags
• Including bracket to attach reflectors or lamps
• Allows for optional upgrade with side frames for panniers (prod. code 2338590)

Technical details:
• Intended use: MTB, Hybrid (incl. e-bike)
• Material: aluminium, fibreglass composite, polyamide
• Attachment: attaches to rear stay with velcro straps
• Compatibility: Topeak MTX/RX TrunkBags, Topeak MTX rear baskets, KLICKfix® / RackTime® Snapit or Vario System bags
• Maximum load: 12 kg
• Compatible wheel sizes: 27.5“ to 29“
• Compatible tyre width: up to 2.8“ (71 mm)
• Dimensions: approx. 47.5 x 38.5 x 13.5 cm
• Weight: approx. 1.1 kg

Mounting requirements:
• Minimum seat stay angle: 30°
• Minimum tube diameter: 15 mm
• Required free mounting space: approx. 200 mm
• Seat stay spacing: approx. 95 – 125 mm

Compatible Topeak TrunkBags and bike baskets available at ROSE:
• Topeak MTX TrunkBag DX (product code: 2183352)
• Topeak MTX TrunkBag EX (product code: 2183370)
• Topeak MTX Basket Rear (product code: 762113)

Tip:
With the Topeak TetraRack Side Frame Set (prod. code 2338590) you can also use the TetraRack system with panniers!

In the box:
• 1 Topeak TetraRack M2L rear rack system
• 1 bracket for reflectors or lamps
• 1 hex wrench, 2.5 mm

Note:
Mounting the rack on carbon frames is NOT recommended. Compatibility cannot be guaranteed for extraordinary frame geometries (e.g. seat stays run at an angle to the wheel axle).

ATTENTION:
NOT compatible with V-brakes and cantilever brakes!




Manufacturer: Topeak Inc, 8F-4, NO.20, Ta Long Road Taichung, Taiwan, www.topeak.com/de/de
Responsible person: RTI Sports GmbH, Am Autobahnkreuz 7, 56072 Koblenz, Germany, www.topeak.com/de/de