The 612 ERGOWAVE 2.1 carbon was designed as a sporty road bike and XC saddle that allows you to get the most out of every pedal stroke – without compromising on comfort.
To achieve this, the saddle has a stepped seat surface that distributes your weight over the sit bones while keeping pressure away from sensitive areas. In addition, the lower saddle nose provides more clearance when the rider is leaning forwards. A recess in the centre of the saddle provides additional relief for sensitive areas of the body. The overall reduced, narrow saddle shape gives you more freedom of movement, less friction on the saddle flanks and allows you to maximise efficiency.
And of course, the 612 ERGOWAVE is also equipped with the sensitive active technology Sport. It allows the pelvis to move sideways during the ride, which can reduce the strain on the lower spine, pelvis and hips. In this way, the intervertebral discs and facet joints are relieved, too.
Details:
• Sporty road and XC saddle for a forward-leaning riding position
• Equipped with active technology Sport (medium elastomer pre-installed)
• Wave-shaped saddle contour provides relief for the perineal and pubic bone area
• Narrow saddle shape reduces friction on the saddle flanks
• Ovalised carbon seat stays for low total weight
Technical details:
• Intended use: road, XC
• Unisex
• Outer fabric: microfibre
• Padding: Superlight Foam (Shore hardness 60)
• Saddle shell: carbon-reinforced polyamide (PA12+CF)
• Saddle rails: Carbon (7 x 9.6 mm)
• Saddle length: approx. 275 mm
• Max. load: 90 kg
Available saddle width:
• 12 cm (weight: approx. 187 g)
• 13 cm (weight: approx. 188 g)
• 14 cm (weight: approx. 189 g)
• 15 cm (weight: approx. 208 g)
• 16 cm (weight: approx. 212 g)
Please indicate your choice.
In the box:
• 1 SQlab 612 active 2.1 carbon road bike/XC saddle
incl. medium elastomer (grey, recommended for 65 to 85 kg body weight)
Tip:
The SQlab elastomer kit for adapting to different rider weights can be found under prod. code: 1651430101.
active Technology:
The active saddle technology allows the saddle to tilt and move easily as soon as the rider shifts their weight. This movement can reduce pressure on sensitive areas, increase stability and promote a natural, ergonomic sitting posture.
Different elastomers in various degrees of hardness allow customisation to the individual rider's weight.
SQlab saddle width system:
Choosing the right saddle width based on the individual sit bone distance ensures effective weight distribution and optimises comfort and ergonomics. This helps to avoid problems such as numbness, ischial pain, tailbone pain and pressure on the pubic arch. For information on sit bone measurement:
https://www.sq-lab.com/en/ergonomics/sit-bone-measurement-for-bike-saddles
Manufacturer: Boards & More GmbH, Rabach 1, 4591 Molln, Austria, www.sq-lab.com
){kind=small}
0