SP Connect Wireless Powerbank SPC+ 5,000 mAh

If you use your smartphone for navigation on longer bike rides, the battery can sometimes run flat. In this case, the SP Connect Wireless Powerbank SPC+ provides you with additional energy. Its battery offers a capacity of 5,000 mAh and charges your smartphone inductively with up to 10 W. You do not need a charging cable between the power bank and smartphone.

The power bank is attached as an intermediate piece to a compatible SP Connect mount via twist-to-lock. You can then attach your smartphone with a suitable SP Connect Phone Case to its top. This way, the smartphone remains in its intended position during the ride and is charged at the same time.

Via the USB-C in-and-out port, you can charge the power bank or supply other devices with energy via cable. Pass-through charging also enables the simultaneous charging of the power bank and the attached smartphone via a connected power source. Details: 
• Compact power bank for the SP Connect system 
• 5,000 mAh battery capacity 
• Allows for inductive charging with up to 10 watts* 
• Attached as an intermediate piece between the SP Connect mount and smartphone 
• Twist-to-lock mechanism for attachment to the mount 
• Mount for a smartphone with a suitable SP Phone Case on the top 
• USB-C in-and-out port for charging the power bank and other devices 
• Pass-through function for simultaneous charging of power bank and smartphone 
• LED display for the battery charge status 
• Switching on and off via a control button 

Technical details: 
• Material: plastic 
• Mounting system: SPC+ 
• Connection: USB-C (IN/OUT) 
• Capacity: 5,000 mAh; 18.5 Wh 
• Output current (inductive): max. 10 W 
• Input current: 5V / 2.6 A, 9 V / 2 A 
• Supported charging standards: QC 2.0, QC 3.0, PD 2.0, PD 3.0, PPS 
• Combined output current (inductive and USB-C): 5 V / 2.4 A 
• Protection category: IP55 • Operating temperature: −10 °C to +45 °C 
• Dimensions: 66 x 102 x 18.5 mm 
• Weight: approx. 150 g

In the box: 
• 1 SP Connect Wireless power bank SPC+ 5,000 mAh 
• 1 USB-C cable, 15 cm 
• 1 SPC+ adapter 
• 1 SPC+ tool 

*Note: Smartphone must support inductive charging. Charging power depends on the smartphone used, ambient temperature, etc. Tip: The matching smartphone case for attaching your mobile phone to the power bank with the twist lock can be found under prod. code: 2336078.

Manufacturer: SP United Vertriebs GmbH, Großmarktstraße 7A, 1230 Wien, Austria, www.sp-connect.de