Rose Shave One Piece Cockpit 

World Tour vibes for your racing bike: With the one-piece carbon cockpit from the Shave model series, you can give your road bike a visible and noticeably upgrade – or customise your existing Shave setup to suit your individual preferences.  
Shaped in a virtual wind tunnel and packed with ergonomic details, the cockpit of the Unibet Rose Rockets is well thought out from front to back and from top to bottom. As with the cockpit of the Backroad FF, the guiding principle here is the same: Aero in the hoods, control in the drops This means: Narrow and aerodynamic in the upper grip areas and with flared lower handlebars for fast descents – with modern handlebar widths down to 35 cm.    This is particularly advantageous in the low race position – with the hoods gripped far forward and the forearms supported. The position popular among breakaway riders is not only more aerodynamic, but is also noticeably more comfortable thanks to the flattened area in the tops. An integrated grip structure on the upper handlebar also ensures comfort and a secure grip on steep passages, which also makes the cockpit stand out from the crowd. 
A little below, things continue in a well thought-out way: The moderately flared lower bar with 13° flare offers just the right amount of control for fast descents and technically demanding terrain. The long drops and the wide handlebar arch, which improves access to the brake levers, also convey safety. The contours of the bar top have also been optimised so that there is enough space for the forearms when sprinting.     Exposed brake lines are also no longer an issue with the Shave cockpit. They run fully integrated through the cockpit and therefore do not interfere with the visual appearance or aerodynamics. To achieve perfect aerodynamics, the Shave cockpit has been refined further and further in countless CFD analyses – making it a good 28 percent faster than its predecessor and helping to make the Shave the most aerodynamic bike in its class.     Details: 
• Carbon cockpit from the Shave road bike model range  
• Combined handlebar/stem unit 
• Lightweight and stiff, with dampening material properties 
• Flared drops with ergonomic bend for more comfort and control 
• Flattened bar top – aerodynamic and comfortable 
• Integrated grip structure on the top bar for comfort and a secure hold  
• Prepared for fully integrated cable routing (see note below) 
• Concealed interface for optional Rose Computer Mount (see note below) 
• Matching time trial extension available as an accessory (prod. code 1637090001 and 1637100001)     Technical details: 
• Intended use: road bike 
• Material: Carbon 
• For threadless 1 1/8” steerer tubes (28.6 mm)* 
• Clamping height on steerer: min. 32 mm 
• Stem angle: -6° 
• Drop: 125 mm 
• Reach: 78 mm 
• Flare: 13° 
• Rise: 0 mm 
• Drop width: + 50 mm (e.g. 400 mm with 350 mm handlebar width) 
• Permitted weight: 120 kg (system weight of cyclist, bike and luggage) 
• Weight: approx. 370 g (measured for 370 x 110 mm, incl. screws and Ahead cap)    Available handlebar width / stem length: 
• 35 cm / 90 mm 
• 35 cm / 100 mm 
• 35 cm / 110 mm 
• 35 cm / 120 mm 
• 35 cm / 130 mm 
• 37 cm / 90 mm 
• 37 cm / 100 mm 
• 37 cm / 110 mm 
• 37 cm / 120 mm 
• 37 cm / 130 mm 
• 39 cm / 90 mm 
• 39 cm / 100 mm 
• 39 cm / 110 mm 
• 39 cm / 120 mm 
• 39 cm / 130 mm 
Please indicate your choice.    In the box: 
• 1 Shave One Piece Cockpit    The top cap is NOT included. It is separately available, see product code: 235304601. 
   Note:  
The Shave uses special spacer adapters with right-hand cable routing for integrated cable routing. For different bike models, find out in advance whether suitable spacer adapters are available for your bike.  
The Shave Cockpit was developed for electronic shifting with wireless control (SRAM AXS, Shimano Di2 12-speed). The cable integration is therefore only intended for brake hoses – NOT for additional shift cables or Di2 cables.    Tip: 
The matching Shave Cockpit Mount for mounting a bike computer can be found under prod. code: 235304501. 
Please note: 
No warranty for damage caused by non-approved mounts.

Manufacturer: Rose Bikes GmbH, Schersweide 4, 46395 Bocholt, Germany, www.rosebikes.de