Reverse Components Black-ONE D-2 Ahead Stem (Ø35 mm x 35 mm)

With a length of 35 mm, the Reverse Black-One-D2 stem is predestined for dirt bike use.

Technical details:
• Intended use: MTB (Dirt, All Mountain, Trail, Enduro, Freeride, Downhill)
• Material: 6061 T6 Aluminium
• Fork Steerer Ø: for threadless forks with steerer outer diameter of 28.6 mm (1 1/8”)
• Handlebar clamp: Ø 35 mm
• Length: 35 mm
• Clamping height on steerer tube: approx. 40mm
• Clamping width: 50 mm
• Angle (rise): 8°
• Weight: approx. 155 g ( +/- 5% weight tolerance)

In the box:
• 1 Reverse Components Black-ONE D-2 ahead stem with Ø 35 mm handlebar clamp, 35 mm length

Installation instruction for the front faceplate!

1. Completely loosen the upper and lower handlebar clamp bolts and remove the handlebar clamp.
2. Install the handlebar, the handlebar clamp and tighten the lower bolts of the handlebar clamp slightly (max. 1 Nm).
→ The lower gap between handlebar clamp and stem must be completely closed.
3. Align the handlebar.
4. Tighten the upper bolts of the handlebar clamp alternately using a torque wrench until you have reached a tightening torque of 6 Nm.



without original packaging



Manufacturer: Reverse Components GmbH, Rudolf-Diesel-Strasse 13, 72250 Freudenstadt, Germany, reverse-components.com/de