ORTLIEB Back Roller Urban QL 2.1 Pannier Bag

The multifunctional ORTLIEB Back Roller Urban Line pannier bag (single bag) is ideal for anyone who needs a spacious, waterproof bag for the way to work, university or school. Suitable for casual or business outfits, the bag is made of a Cordura cotton mix with a textile look. Thanks to the PU coating on the inside, it is still absolutely waterproof. The bag can be fitted to the luggage rack in a quick and uncomplicated way using the practical Quick-Lock2.1 mounting system. A permanently installed inner pocket, consisting of a main compartment and a zipped mesh pocket, ensures a tidy inside of the bag. With the shoulder strap, the BACK-ROLLER URBAN can be carried comfortably as a shoulder bag.

Details:
• Single pannier for left or right side mounting
• Classic city rear pannier (single bag) with roll-top closure
• PU coated, soft touch Cordura-cotton blend
• With Quick-Lock2.1 mounting system for racks with a tube diameter of up to 16 mm
• Including reducing adapters for tube diameter 8, 10 and 12 mm with anti-scratch function to protect the rear rack

• With integrated inside pocket and shoulder strap
• Upper QL hook and lower sliding hook can be adjusted without tools
• The lower hook rail consists of a two-component plastic “hard-soft” with anti-scratch function to protect the rear rack

• Ideal for shopping, sports, picnics etc.
• Reflective design elements
• Easy to clean inside

Note: Just one pannier included in the scope of delivery.

Technical details:
• Dimensions: approx. 42 x 23/32 x 17 cm (H x W x D)
• Volume: approx. 20 l
• Weight: approx. 840 g

NOTE: In order to reach protection standard IP64 (6=dustproof, 4=resistant to wheel spray coming from all directions) the roll closure must be folded down 3-4 times and fixed at the bottom.


In the box:
• 1 ORTLIEB Back Roller Urban QL 2.1 bike bag
• With carrying strap and reducing adapters in 8, 10 and 12 mm (2 pairs per size)

Highlights & Technologies:

QUICK-LOCK2.1:
The bicycle bag mounting system QL2.1 is based on the proven QL2 system, but has been further upgraded to perfectly fit current pannier rack models.
• Comfortable single-handed operation
• The 16 mm Quick-Lock hooks come with reducing sleeves with anti-scratch function in 8, 10 and 12 mm. For a more secure connection, the reducing sleeves of the QL2.1 are fitted into the base hook from the sides
• For optimal stability the upper hook rail comes in a single-piece design, yet it can be adjusted to fit the either side of the rack on Office-Bag and Downtown models
• A special tightening technique allows the use of particularly flat nut washers on the inside. This makes it almost flat and protects the goods being transported
• The lower hook rail consists of a two-component plastic with anti-scratch function. The contact surfaces are soft to reduce rubbing against the rack tube. The lower hook rail is rotatable in 15-degree steps and adjustable in height.
• All hooks may be adjusted without tools and replaced within seconds
• The upper rail is compatible with optional theft protection systems

Note:
The reflective design elements attached as decorative elements do not represent a personal protective equipment as mentioned in EU regulation 2016/425. Thus, they are also not covered by the provisions of the regulation.



Manufacturer: Ortlieb Sportartikel GmbH, Rainstraße 6, 91560 Heilsbronn, Germany, www.ortlieb.com