Milkit Tubeless Conversion Kit

The conversion kit from MilKit makes tubeless conversion clean and easy!

Thanks to the MilKit system, you can mount tubeless tyres dry on the rim and then fill the sealant into the inflated tyre via the valve – quickly and without making a mess. The intelligent valve system allows you to measure and refill sealant without losing air or removing the tyre.

After inserting the valves and fitting the rim tape and tyre, inflate the tyre slightly and unscrew the valve core. Yes, you read that right. The air remains in the tyre. Then fill the syringe with the desired amount of sealant, fit the inner tube and needle and fill through the valve. Screw in the valve core, swivel the tyre, done. You can do the same thing for the fill level check later - suck out the sealing milk in the tyre through the valve at the 6 o'clock position, or check and refill or replace it.

Once filled, the ammonia-free sealant can seal holes with a diameter of up to 6 mm. With its special consistency, this sealant adheres better to the inside of the tyre than thin latex products. In this way, it always covers the entire tread and sidewalls to ensure maximum puncture protection.

Details:
• Tubeless conversion kit based on the MilKit system
• With high-performance rim tape for airtight sealing of the rim base
• Special valves enable measuring and refilling of sealant
• No dismounting of the tyre necessary for filling with sealant (at approx. 1 bar tyre pressure)
• No valve clogging thanks to integrated rubber flaps
• Ammonia-free sealant with synthetic latex and microfibres
• Seals holes with a diameter of up to 6 mm
• CO2 compatible
• Can be kept in the bottle for up to 5 years (including bottles that have already been opened)
• Can be watered down and washed off

Technical details:
• Material: aluminium
• Valve type: Presta valve
• Valve length: approx. 45 mm
• For valve hole: Ø 6.5 mm
• Temperature range of sealant: -20 to +50° C

Available with rim tape width:
• 21 mm
• 25 mm
• 29 mm

In the box:
MilKit Conversion Kit consisting of:
• 2 MilKit tubeless valves, 45 mm
• 1 Valve core remover
• 1 tubeless rim tape, 10 m
• 1 MilKit tubeless sealant, 250 ml
• 1 MilKit compact syringe system
• 1 filling needle for sealant


Note:
Safety first! You should always wear gloves and safety goggles when working with sealant.

Other Milkit products offered by Rose:
• Milkit Tubeless Booster portable inflator for tubeless tyres (prod. code: 228550703)
• Milkit Tubeless Sealant (prod. code: 2290534)
• MilKit Sealant Remover (prod. code: 1647700001)
• Milkit tubeless valves for the Compact Tubeless refill system (prod. code: 2279440)
• Milkit tubeless rim tape (prod. code: 16476601)

Manufacturer: Sport Components AG, c/o PB Invest (Schweiz) AG, Feldeggstrasse 24/26, 8008 Zürich, Switzerland, milkit.bike/
Responsible person: MERIDA & CENTURION Germany GmbH, Blumenstraße 49-51, 71106 Magstadt, Germany, www.mcg-parts.de