HORNIT CLUG MTB Wall Mount Bicycle Rack

Gone are the days when your mountain bike was leaned against the wall in the garage. Gone are the times of scratches and damages. The CLUG MTB by HORNIT is a small and practical wall mount bike rack that will cut a fine figure in your living room. Simply hook the tyre into the rack to fix the bike within seconds. Removing it is just as easy, so that you can take your bike out for a ride whenever you want to. You can find suitable HORNIT MUD PADs with Micro Vacuum coating to protect the wall around the rear wheel here: prod. code: 2325448.

There are two ways to store your MTB:
• With the rear wheel standing on the ground and the front wheel hooked in
• With both wheels on the ground and the rear wheel hooked in (It’s not recommended to hook in the front wheel)

Details:
• Bike rack with a minimalist design
• For MTBs, touring bikes and travel bikes
• For 44-57 mm wide tyres (1.75-2.25”)
• Easy to mount with two bolts only
• Drilling templates included

Tip:
For more CLUG models for different tyre sizes see:
• HORNIT CLUG ROADIE (prod. code 2295729)
• HORNIT CLUG HYBRID (prod. code 2295719)
• HORNIT CLUG MTB XL (prod. code 2295733)
• HORNIT CLUG PLUS (prod. code 2295734)
• HORNIT MUD PAD for wide MTB tyres (prod. code 232544802)

In the box:
• 1 CLUG MTB bike rack
• Mounting kit
• Manual

Attention:
The decisive factor is the actual tyre width. Since the actual width depends from several factors (e.g. rim width), we recommend you to measure your tyres before placing your order.



Manufacturer: Hornit, 1 Barnfield Crescent, Exeter, EX 1QT, United Kingdom, www.hornit.com
Responsible person: Grofa Action Sports GmbH, Otto-Hahn-Str. 17, 65520 Bad Camberg, Germany, www.grofa.com/de/contact-de/