GAADI Butyl Hybrid Inner Tube 622/635x32-37 or 700x32-35 C

The open GAADI bicycle inner tube makes tyre repair works a child's play. A flat tyre can soon result in extensive repair works - especially at the rear wheel, as you need to remove the chain case of complex shifting, braking and e-drive systems before replacing the inner tube. With the GAADI bicycle tube with two ends, a time-consuming replacement with dirty fingers is a thing of the past. In case of a flat, you can quickly and easily replace the inner tube without any tools, except a tyre lever. After removal, the open tube with two ends is easily put underneath the tyre, past chain stays and add-on parts. The position of the valve in the first third significantly facilitates installation. Refit the tyre and done. As regards quality, the GAADI bike tube is in no way inferior to conventional bicycle tubes. It is made from a high-quality butyl rubber compound and weighs the same as a conventional branded tube.

Manufacturer's ref.:
1732860500 (28" 32/37-622/635 oder 700 x 32C–700 x 35C Presta valve 47mm)
1732860700 (28" 32/37-622/635 oder 700 x 32C–700 x 35C Schrader valve 40mm)
1732860900 (28" 32/37-622/635 oder 700 x 32C–700 x 35C Dunlop valve 40mm)

Note:
In general, a distinction is made between the following common valve versions:
· Presta valve: also called Sclaverand valve or French valve
· Dunlop valve: also called woods or English valve
· Schrader valve: also called American valve

Manufacturer: Rubena s.r.o., Ceských bratrí 338, 547 01 NáchodNáchod, Czech Republic, www.mitas-tires.com/de-de