Elite Justo 2 Roller Trainer Direct Drive incl. Zwift Cog and Click

With the Justo 2, Elite introduces the successor to its top-of-the-range roller trainer. The direct-drive trainer features integrated WiFi connectivity, a heavier flywheel, and, in this version, a pre-installed Zwift Cog as well as the matching Zwift Click remote.

The Zwift Cog replaces the traditional cassette and makes the trainer particularly flexible to use: Different bicycles with 8- to 12-speed drivetrains can be used without you having to change the cassette on the trainer every time. The rear derailleur remains aligned on a single sprocket during training, while you switch between 24 virtual gears using the Zwift Click remote on the handlebars. If you wish to use the Justo 2 with other training apps or use another bike with a traditional gear system, you can simply remove the Cog and mount a 9- to 12-speed cassette on the SHIMANO HG-standard freehub body.

The Justo 2 also simplifies handling in terms of connectivity: Thanks to the integrated WiFi module, the trainer can be connected to your home network via WiFi, enabling automatic firmware updates and responsive data transfers to the most popular indoor training apps. There was also a completely analogue update to the trainer's flywheel: With a full kilo more mass, it reacts deliberately slower to your acceleration, giving you an even more realistic riding experience.

The pedalling resistance of up to 2300 watts is very real, allowing you to complete any training session, no matter how tough. The incline simulation of up to 24 per cent does the rest. The integrated Power Torque power meter provides you with watt values with a tolerance of < 1 %, allowing you to precisely control your training and accurately document your progress. You will no longer need to do regular calibration procedures – the Justo 2 calibrates itself automatically and unnoticed in the background. Those who frequently ride in ERG mode will also be pleased with the new "Easy Start" function, which makes it much easier to restart after unscheduled breaks.

The Justo 2 also has many other useful features that make it easier to pair with virtual cycling apps and peripherals of all kinds – including dual Bluetooth support, a bridge function for integrating sensor signals and the option of a secure cable connection via Ethernet. The two stand-alone modes, on the other hand, work completely without an app or even a power cable – for quick workouts in between or warm-up training before a race, for example.

The Justo 2 offers everything you could expect from a modern indoor trainer and is likely to be at the top of many cyclists' wish lists, both as a classic winter trainer and for ambitious year-round zwifting.


Top features: 

ZWIFT COG AND CLICK
The pre-installed Zwift Cog replaces the traditional cassette and allows the use of most bicycles with 8- to 12-speed shifting without having to change the cassette on the trainer. The rear derailleur remains aligned on the single sprocket during training, while the gearing is adjusted virtually in Zwift. You can switch between 24 virtual gears on the handlebars using the compact, wireless Zwift Click remote. Gear changes are quiet and direct, without the rear derailleur having to mechanically move the chain between different sprockets.

POWER METER
The accuracy of the Justo 2 data during training is guaranteed by the Optical Torque Sensor (OTS). This sensor is a built-in power meter that ensures that your wattage is measured with a maximum deviation of < +/- 1%. The cadence is also recorded automatically.

FASTER PERFORMANCE RECORDING
In the Justo 2, the frequency for measuring power, speed and cadence data is recorded at 10 Hz, i.e. read out 10 times per second. And not only when using wired TCP-IP devices such as the Elite Gateway, but also via the Bluetooth protocol. This means that changes in your performance are transmitted to compatible apps particularly quickly, which can give you a decisive advantage, especially in racing situations.

INTERACTIVE INCLINE SIMULATION
The Justo 2 is an interactive roller trainer and therefore varies the resistance automatically. It is able to simulate inclines of up to 24% and develops a power of 2300 watts at a speed of 40 km/h. With this Italian smart trainer, you will easily work up a sweat.

HIGH COMPATIBILITY
The pre-installed Zwift Cog is compatible with most bicycles with 8- to 12-speed shifting system. End caps for quick-release and 12 × 142 mm thru-axles allow for direct use with many road bikes, gravel bikes and mountain bikes. Once the Zwift Cog has been removed, standard 9- to 12-speed cassettes can be fitted to the HG-L freehub. Campagnolo cassettes, SRAM XD/XDR cassettes, and SHIMANO Micro Spline cassettes can also be used via optional freehub bodies. Adapters for other thru-axle sizes are available separately.

INTERACTIVITY IN ALL AREAS
The Justo 2 belongs to the new generation of interactive roller trainers with ANT+™ FE-C & Bluetooth, which interact with apps, software, computers and peripheral devices (smartphone and tablet) of all kinds with IOS, Android, OSX and Windows. With just a few steps, you can set training routes or programmes and off you go! Your indoor trainer automatically varies the resistance. The Justo 2 can be controlled with the Elite software My E-Training (free access for 36 months) or other platforms for indoor cycling, including: Zwift, TrainerRoad, Rouvy, RGT, The Sufferfest, Bikevo, Bkool, Kinomap and a lot more.

AUTOMATIC CALIBRATION
With the Elite Justo 2 roller trainer, you can save yourself regular manual calibration procedures. Your Smart Trainer is able to adjust itself to you by automatically calibrating at the appropriate time. So you benefit from a new function that always supports your training with precise readings – even after changes in location, temperature etc.

STAND-ALONE-MODE
Your Justo 2 Smart Trainer has two stand-alone modes, so you can continue to use it even when it is not connected to any software or even powered. Without app control, you can still simulate training on the road with a previously set incline value between 0 and 24 percent. Without a power supply, you can still use the second stand-alone mode, which regulates the resistance depending on the speed, just like a fluid trainer. You can set the difficulty level beforehand with a value from 1 to 16.

COMPATIBLE WITH RIZER AND STERZO
Intensify your training experience with other Elite accessories such as the Rizer incline simulator. This way you can feel the incline and decline not only through the wattage resistance, but also through the horizontal incline of your bike, just like in real outdoor training. Or you can use the Elite Sterzo front wheel support to steer your avatar in Zwift with real steering movements instead of following the predefined riding line (integrated in RIZER).

ERG EASY START & POWER SMOOTHING
The Easy Start function in ERG training mode makes it easier to start if you had to pause briefly at high wattage. As soon as the flywheel stops, the trainer lowers the resistance and then raises it again after a few turns of the crank. An additional power smoothing function allows you to "smooth" the output wattage values in four steps so that the number jumps are less disruptive. 

BRIDGE FUNCTION AND BLUETOOTH DUAL CHANNEL
To give you maximum freedom when setting up your smart trainer, the Justo 2 can be connected to two different Bluetooth devices at the same time, for example your tablet, with the trainer app installed, and your bike computer. An unlimited number of additional devices can be integrated via ANT+. The bridge function also makes it possible to feed the signal of a heart rate monitor or cadence sensor into the Bluetooth FTMS signal in order to bypass Bluetooth limitations of other devices such as Apple TV.

INTEGRATED WIFI CONNECTIVITY Thanks to the integrated WiFi module, the trainer can be connected to your 2.4 GHz home network via WiFi, enabling automatic firmware updates and responsive data transfers to the most popular indoor training apps. 

DETAILED CADENCE ANALYSIS
With its detailed cadence analysis, the Justo 2 is able to analyse difference in the watt power achieved with the right and left leg, detect imbalances and counteract them effectively. Moreover, the trainer delivers accurate data on cadence, pedalling efficiency as well as on power and torque efficiency. The cadence analysis feature is available for a fee in the Elite software My E-Training.

SIDEWAYS MOVEMENTS WITH FLEX FEET
The Elite Justo 2 now makes the riding experience on the roller even more realistic. Flexible elastomer feet allow slight lateral tilting movements to give your workout a more natural dynamic. This gives you more freedom of movement and helps prevent fatigue or tension during long training sessions. The "Flex Feet" are supplied in two degrees of hardness so that you can choose according to your body weight, riding style and individual preferences.


Details:
• Interactive roller trainer with direct-drive drivetrain 
• Incl. pre-installed Zwift Cog for 8- to 12-speed shifting systems and wireless Zwift Click remote for 24 virtual gears 
• Integrated OTS power metre (accuracy +/- 1 %) • Speed and cadence measurement 
• Computer controlled resistance via ANT+ FE-C or Bluetooth FTMS 
• Lateral freedom of movement thanks to elastomer Flex Feet (2 levels of stiffness) 
• Side feet (can be folded in) 
• Synthetic leather carrying strap for easy transport 
• Cable guide sleeves to prevent damage 
• Light indicators for power supply, ANT+- and Bluetooth connection 
• Long rear derailleur cage support 
• Can be controlled via smartphone/tablet app (iOS, Android), bike computer, sports watch, Windows and Mac via ANT+ and Bluetooth 
• Controllable with Di2 shifters (SHIMANO Dura-Ace Di2 R9200, Ultegra Di2 R8100 12-speed or Dura-Ace Di2 R9100, Ultegra Di2 R8000 11-speed with optional SHIMANO EW-WU101/EW-WU111 wireless unit) 
• Wifi connectivity for automatic updates and app integration 
• Connection option for optional Ethernet dongle 
• Compatible with optional Elite Rizer height simulator and Elite Sterzo Smart steering plate 
• Incl. front wheel block to keep the front wheel at the correct height and hold it in place

Technical details: 
• Drivetrain: Direct Drive (interactive) 
• Resistance: electronically controlled magnetic brake 
• Resistance levels: no levels 
• Flywheel: 7.2 kg 
• Max. simulated incline: 24 % 
• Max. braking power: 1100 watts at 20 km/h, 2300 watts at 40 km/h 
• Stand-alone operation: yes (2 modes: without app with power / without app without power) 
• Calibration: automatic 
• Automatic firmware updates via WiFi: yes (connection to a 2.4 GHz wireless network with internet access required) 
• Wired data transmission: Ethernet (with optional Elite Gateway) 
• Wireless data transfer: WiFi 2.4 GHz 
• Dimensions (unfolded): approx. 570 × 720 × 520 mm (L × W × H) 
• Dimensions (when folded): approx. 570 x 195 x 520 mm 
• Weight: approx. 17 kg 
• Rider’s weight: max. 110 kg

Cassette compatibility (with Zwift Cog and Click system removed): 
• SHIMANO HG 8-/9-/10-/11-speed (MTB/Road) 
• SHIMANO HG 12-speed (only Road) 
• SRAM 8-/9-/10-speed (MTB/Road) 
• SRAM 11-speed (only Road) 
• SRAM NX 12-speed 
• SHIMANO MICRO SPLINE (separate freewheel body required – see prod. code 2307483) 
• SRAM XD/XDR (separate freewheel body required – see prod. code 2307482) 
• Campagnolo 9-/10-/11-/12-speed (separate freewheel body required – see prod. code 2270765)

Rear axle compatibility: 
• Suitable for wheel sizes from 20" to 29" 
• 5 x 130-135 mm quick release (included) 
• 12 x 142 mm thru axle (included) 
• 12 x 148 mm BOOST thru axle (separate adapter required – see prod. code 2309042) 
• 12 x 157 mm Super BOOST thru axle (separate adapter required – Elite prod. code 1014346) 
• 10 x 135 mm Thru Bolt (separate adapter required – Elite prod. code 1014306) 
• 12 × 135 mm thru axle (separate adapter required – Elite prod code 1014306) 
• 12 x 135 mm Specialized SCS (separate adapter required – Elite prod. code 1014087)

Data transfer: 
• ANT+ (FE-C, power, speed and cadence), unlimited 
• Bluetooth (FTMS, power, speed and cadence); dual channel and bridge function for external heart rate/cadence monitor 
• WiFi 2.4 GHz (updates and app integration)


In the box: 
• 1 Elite Justo 2 indoor trainer incl. pre-assembled Zwift Cog and soft Flex Feet 
• 1 Zwift Click remote control 
• 1 pair of medium-hard replacement feet 
• 1 mains adapter 
• 1 adapter for quick-release (Ø 5 mm, installation width 130–135 mm) 
• 1 adapter for thru-axles (Ø 12 mm, installation width 142 mm) 
• 1 Travelblock front wheel support 
• 1 voucher for the Zwift introductory programme



Manufacturer: ELITE S.R.L., via Fornaci 4, 35014 Fontaniva (PD), Italy, www.elite-it.com/it