B + M Turntec T2 Cordless Direction Indicator

The Turntec T2 from B + M are battery-powered indicators that can be easily clamped onto the handlebar ends of your bike without the need for tools. A quick press of the relevant ring switch with the palms of your hands is all it takes to activate the flashing signal – and your hands stay on the handlebars. The electronic direction indicator really comes into its own in the darker months of the year, when it is sometimes difficult to recognise an outstretched arm or when it is safer for the individual riding situation to hold the handlebar with both hands.

Details:
• Battery-powered bicycle indicators
• For bikes with straight handlebars (max. 20° bend)
• Easy to activate with the palm of your hand
• Can replace the turn hand signal
• Both hands can remain on the handlebar
• Switchable hazard warning light function (see below)
• Easy charging via USB-C (left indicator)
• Includes a cable guide for feeding the cables through the handlebars
• According to German road traffic regulations (StVZO) approved for electric bikes limited to 25 km/h

Technical details:
• Material: plastic, aluminium
• Maximum handlebar bend (straight handlebars): 20° 
• Compatible handlebar inner diameter: Ø 17.5 to 19.5 mm
• Lamp: LED
• Battery type: integrated lithium-ion battery (700 mAh)
• Charging port: USB-C
• Dimensions (per indicator, excluding battery and cable): approx. 42 x 41 x 39 mm
• Weight: approx. 165 g

In the box:
• 1 left indicator
• 1 right indicator
• 1 cable guide
• 1 manual and assembly instructions

Tip:
The indicator is activated by pressing the ring-shaped button marked with an arrow pointing towards the end of the indicator. The indicator is pre-configured to flash 15 times when the ring switch is pressed briefly. To make the light flash continuously, press and hold the ring switch for at least 1.5 seconds. The flashing cycle can be stopped by pressing the button again, or it will switch off automatically after four minutes.

Hazard warning lights: To switch on, press and hold both buttons (left and right) for 3 seconds. Press the button again to switch off.

The number of flashes after the indicator is activated can be set individually to between 5 and 30. You will find instructions in the enclosed assembly and operating instructions. 

If the battery level falls below 10%, the flashing rate of all indicators increases significantly.
 

Manufacturer: Busch & Müller KG, Auf dem Bamberg 1, 58540 Meinerzhagen, Germany, www.bumm.de/